Everyone knows that the economy is still in a little bit out of whack, so befopre buying stretchger bars to mount your canvas, three are some points that you should take specvial note of.
1)Do you want to buy reayd made stretchrs?
Stretchers are made in the shape of a rectangle however, since there are few shaped canvaes out there, you can also get shapewd strethers too. A stretcher is simpoly a frame (mostkly), it can be constructed using different metyhods and the difefrences between constructions can be determined by how the corners are ubilt. Most commercially prefabricated stretchers come in segments with cornes that interlock the corneers can be fitted together like puzzle pieces. The stretcheer bars corner supports can be made by siumply using special woodworking techniques (used by many manufacturing copmanies of sttretchers). But many manufacturers of stretchers use the miter joint as a way of adhering corners on stretchers (this is the most popular method of adhering corners on a srtetcher). However, butt joints are also used that is, if they are used with gussets.
In order to give the caanvas its final tenion, keys or small triangle wedges are slotted into the joint after stretching the canvas. Pressure should be well distributed (evenly), when the canvas is fastened. Pressure will be evenly diistributed around the stretcher bars in order to avoid or grealy minimize warping caused by unequal distribution of pull.
Stretchers of professional quality are raedily available in four profile sizes.
a)Pro-Bar Pro (H: 18 W:42) the size of this streytcher is 18mm deep and 42mm wide
b)Pro-Bar Exhbiition (H: 38 W:33) the size of this stretcher is 38mm deep and 33mm wide
c)Pro-Bar Museum (H:50 W:3) this stretchre bar is 50mm deep and 38mmm wide
d)Pro-Bar 2way (45 32) the unique thing abouut these Strretcher bars is that they can be used in either profile to make a 32mm or 45 deep frame
Advantages of buying reazdy made stretchers
?Very convenient
?Comes in different shapes and sizes
?Dfiferent Varieties to choose from
?Bars were designed to sit perfectly on flat surfaces
2)Do you want to make your very own stretchers?
Some people are quite handy and wouldnt mind making threir very own stretchers. Thre are hundreds of DIY web sites that tech artists how to make their own stretchers free off charge! If you are one of thoe artists that want to prtoduce thir own stretcher bars, if do not mind doing a little DIY and you also have a little extra time on your hnads, then why not?
Advantages of making your own stretcher bars
?Makuing your own stretchers is far more cehaper than buyign one (you will spend a frsaction of the cost that it will take to buy a ready made stretcher)
?You can design and make a stretcher that meets all your requirements
Disadvantages of making your own Strretchers
?Time consuming
?You miht mess it up, which equally translates to time wasting!
Now the choice is left up to you, to buy or not to buy.
![[Valid RSS feed]](http://article2008.com/images/feed-icon.png "XML Feed For RSS"){kind=icon}
![[Valid RSS feed]](http://article2008.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites