An Innovative American company has found a simple however effective solution for keeping toilet seats permanently tight. The makers reveal that you will in no way need to carry out the uncomfortable task of re-tightening the toilet seat screws once again.
Yukon Seat Grip, of Royal Oak Michigan, introduces a new adhesive toilet seat washer that will avoid feasible personal injury and toilet seat/hinge damage. The procedure requires much less than 5 minutes to complete.
Traditional toilet seats don't usually stay engaged towards the porcelain toilet bowl basin because the hole in the toilet basin is generally much larger in diameter than the threaded fastener utilized to secure the seat to it. The seat is attached towards the bowl by a metal or nylon threaded bolt and nut assembly. The hole in the commode is usually much larger than the bolt dimension which brings about a loosening of the bolts over time from constant use. The result is an insecure, wobbly, sloppy toilet seat. When a individual raises and lowers the toilet seat and sits down on the toilet, they shift and vibrate the seat towards the bowl basin, leading to it to loosen.
The Yukon adhesive toilet seat washer will avoid bolt slippage and maintain it inside a secure position so the toilet seat remains permanently secure towards the toilet bowl basin. The compressive strength of the nut and bolt act to secure the seat towards the toilet bowl.
The uncomfortable, inconvenient, and awkward task of placing your hands below the toilet bowl basin and using a clumsy tool to re-tighten the fastener assembly is eliminated.
The Yukon Seat Grip washer is made of compressible material with an adhesive facing. The pressure sensitive washer sticks towards the bottom of the porcelain toilet bowl basin and keeps the nut in its place. Simply slip the bolt via the adhesive toilet seat washer and thread the nut back again onto the bolt. The adhesive on the surface of the washer acts to hold the nut in position, thereby sustaining a permanent tightness and protection of the toilet seat unit. If removal is necessary, simply peel from the rubber washer.
![[Valid RSS feed]](http://article2008.com/images/feed-icon.png "XML Feed For RSS"){kind=icon}
![[Valid RSS feed]](http://article2008.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites