Baggie pants could be a lot more than just fashionable.
Do you remember the days of having to put a snowsuit on in order to go out sledding or skiing? No matter what you did the snowsuit would always climb, let snow in, get wet and generally was uncomfortable simply because your pants where bunched up inside. Fortunately for those of us who can keep in mind that, those days are long gone.
Modern snowboarding pants, and even normal snow pants, have vastly improved over what we might keep in mind. Snowboarding pants are now worn like normal pants, thinner, lighter, tougher and warmer than ever prior to. Of course this is only possible thanks to demand and technological advances.
When thinking about snowboarding pants it helps to understand how they work. Generally snowboarding pants use a three-layer system. Some might only have two layers and are either inteended for really mild climates or to be worn over some type of underpants.
The first layer may be the base layer and it is in direct contact with your skin. When riding outside you will heat up really quickly and then cool down whilst on the lift prior to repeating the procedure. The objective of the base layer would be to ensure that this can be done without you getting cold. The main reason you get also cold is simply because your sweat gets caught within the base layer against your skin and begins to freeze. A modern base material will prevent this by wicking the moisture away while providing some temperature balancing advantages.
The next layer may be the insulation layer. The purpose of the insulation layer is to retain your body heat and the best way to do so is by trapping a layer of air around your physique. This air will greatly decrease the heat exchange between your body and the outside world.
Usually the insulation layer mostly consists of polyesters. The most popular materials are fleece, bunting and pile. Fleece may be the most common material and is really a dense fabric which has been raked on one side to make the ends from the fibers stand up and trap the air. Bunting is really a fleece which has been raked on both sides creating a tight solid weave with wooly air retaining surfaces on both sides. Pile is really a single-sided fleece that has undergone more raking and has been processed further to create a much thicker open fabric.
The final layer may be the outer shell, which is the only layer with direct contact to the outside world. The purpose of this layer would be to protect against wind, rain and snow whilst letting moisture escape and guard the wearer from cuts, scrapes and chaffing. This layer is made from a material, such as Gore-Tex, which has holes that permit water vapor from your physique to escape but are too small to permit a big drop of water in.
Now that you know how the products works you can begin shopping. After determining the number of layers you require you must look for other features. If you like to ride at night or in the dusk you may want reflective strips. For security you may wish to have inside zippered pockets. Large pockets are great for packing around food and water and a see via pocket is excellent for you lift pass.
If you keep in mind your snowboarding style, needs and what items are available you are sure to get the correct snowboarding pants. Having the correct gear goes a long ways towards maximizing your comfort and enjoyment while snowboarding. Have fun and stay warm.
![[Valid RSS feed]](http://article2008.com/images/feed-icon.png "XML Feed For RSS"){kind=icon}
![[Valid RSS feed]](http://article2008.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites