You'll need a brake adjusting tool, available at most tool supply stores, a jack proficient at safely lifting the trailer, along with a jack stand to carry the trailer inside the jacked position.The subsequent steps really are a guide to properly adjusting your trailer brakes. What this entails will probably be the adjustment of many star wheel which in turn sets the brake shoe to brake drum clearance. This adjustment is considerable - as the brake shoes wear down, the clearance increases. The actuating mechanism must travel further to effectively apply the brakes along with a point might be reached exactly where the mechanism can't so.
Adjusting RV Trailer Brakes
Park the trailer on firm and level ground.
Block the trailer tires at the opposite side securely to make sure that no forward or rearward movement is a possibility.
Jack the trailer using the manufacturers instructions.
Get the trailer on jack stands of adequate capacity front and rear.
Behind the wheel, on your brake backing plate, there exists small rubber plug nearby the bottom of the backing plate. Pry out this plug to provide admission to the star wheel adjuster.
Some trailers have a drop axle suspension system and also the axle covers the majority of this adjusting hole so it is difficulties use the brake tool. Patience will win out in the end for those who persevere.
Insert the brake adjuster tool and maneuver it in order to tool engages together with the teeth inside the star wheel. The star wheel resembles an a gear with exposed teeth in the perimeter. On most trailers you would pull down in the tool handle which levers at the end of hole and turns the star wheel up (since you are looking using it that came from the back of your wheel. To your cause it to be tougher, the star wheel is found well inside and several maneuvering is required - a flashlight will help to locate the star wheel.
Turn the adjuster before brake locks up, i.e. you could no longer rotate the wheel yourself. This centers the brake shoes on your brake drum so that these are in the correct position.
Author Resource:-
Now electric trailer brakes retreat the star wheel 8 to 10 clicks and / or specified by the maker. The wheel should spin freely lacking any apparent drag to slow it down. A slight scraping noise is normal since the electric trailer brakes wheel turns.